|
This dual outlet molded ASH GRAY ABS housing contains two (2) nozzle mounting fixtures, a 90 degree bottom nozzle mount and also 45 degree nozzle mounting. The ASH GRAY color of the ABS housing blends with the concrete. When mounted horizontally, the 90 degree hole can be used as a drain to keep the housing from filling with water. The pipe fittings are sonic welded and have internal 3/8" NPT to accept the nozzles, and 1/2" slip (glue) externally to accept PVC fittings. All plastic components are compatible with PVC piping. There is also a 3/8" pipe plug supplied to be used when pressure testing the supply lines. |
|||||
|
|
The EXCLUSIVE TRUING RING is designed to compensate for an uneven wall or deck that may vary in thickness. It is capable of 3 degrees (about 5/16") of movement and the housing and brass plate can be fastened securely no matter the wall thickness. | ||||
|
|
The DECORATIVE BRASS COVER PLATE, which is standard equipment on the AquaStream Decorative Jet, has a drain hole at the bottom. This allows water to drain from the housing when mounted vertically to eliminate the problem of freezing in cold climates. Four (4) brass screws are supplied for mounting the plate. There is also a 3/8" pipe plug to be used when pressure testing the supply lines. | ||||
|
|
The BRASS NOZZLE is capable
of being adjusted to any spray angle up to 55 degrees.
All Decorative Jets have an insert in the nozzle assembly that removes the turbulence from the water flow and improves water flow from the nozzle. |
||||
| As can be seen in the table, the AquaStream Decorative Jet kit has a relatively low water flow requirement, allowing several units to be used off of one low volume pump. | Height of stream* | 6' | 12' | 19' | 25' |
| Feet of head | 4' | 8' | 12' | 16' | |
| GPM | 2 | 3 | 3.7 | 4.4 | |
| *Stream distance @ 45 degree angle of projection. | |||||
 |
|||||
|
Call for pricing - Toll Free 1-866-850-7665 (1-866-850-POOL) |
|||||
